FAQs about Floor Standing Boilers
Can Evojet and Imax Xtra share the same heat network header?
Mixing boiler types on a shared low loss header or heat network header is a common plant room design pattern, typically managed through a BMS or dedicated sequencing controller that decides which boiler leads based on demand, efficiency curve and fuel availability. This lets a site pair, for example, an Evojet's heat network capacity with an Imax Xtra cascade's turndown flexibility, though the sequencing logic needs designing around the specific mix of units. Find out more about our commercial condensing boilers.
What ventilation does the Imax Xtra EL need in the plant room?
Combustion air and plant room ventilation requirements scale with boiler output, so a large single unit like the Imax Xtra EL, a floor standing gas boiler designed for high-output plant rooms, needs this checked against current Building Regulations and the manufacturer's installation instructions before layout is finalised, particularly in a retrofit plant room not originally designed for that output. Our specification team can assist with reviewing ventilation provision alongside the rest of the plant room design.
When should I choose an Imax Xtra 2 cascade over an Imax Xtra EL?
An Imax Xtra 2 cascade spreads output across up to four smaller units, giving redundancy and staged firing for load matching, while the Imax Xtra EL delivers the same order of output, up to 1,240kW, from a single heat exchanger, which simplifies the plant room layout at the cost of relying on one unit. The right choice usually comes down to whether resilience during servicing or a simpler single-boiler footprint matters more for that specific building.
What are the benefits of installing commercial boilers in a cascade?
Installing boilers in a cascade offers several benefits over fitting one larger boiler, including a high turn-down, easier access to challenging install areas, and it can be a good space saving solution. To save time at installation choose prefabricated frame and header kits, which can save several hours. Read more about cascade systems: How quickly can you build a three-boiler cascade
Does the Imax Xtra 2 come on wheels?
The Imax Xtra 2 floor standing boiler comes on wheels, for easy installation. It is small and compact to easily fit thorough standard doorways, yet powerful with outputs of 80kW - 280kW. Up to 4 boilers can be cascaded for outputs of 1120kW. Find out why the Imax Xtra 2 is great choice for when space it at a premium.
What boiler can achieve 1MW?
Evomod floor standing commercial boiler is available in 250kW to 1000kW output and will achieve an output up to 1MW from a single unit, together with a minimum footprint and the ability to fit through standard doorways which enables the product to be installed where space is limited. Each module provides a maximum of 250kW heat output and with a modulation rate of up to 20:1 through a sophisticated control system. These floor standing modules can stack up to 3 high. Read more about the Evomod boiler: Evomod
Is the Imax Xtra EL boiler floor standing?
Imax Xtra EL is a condensing floor-standing boiler, with outputs of 320kW to 1240kW specially designed for commercial applications requiring larger outputs in a compact package. Available in 10 models for single or multiple installations. Find out more: Imax Xtra EL
What floor standing boilers are made in the UK?
Ideal Heating have a range of floor standing commercial boilers suitable for every plant room, all manufactured in Britain.
Where high outputs are required and space is tight, these boilers are a great option. Imax Xtra 2, Imax Xtra EL, and Evomod are all small on size, but big on performance! In stock and ready to go - from the UKs leading commercial heating manufacturer. To find a boiler that’s right for you, visit: Commercial Condensing Boilers














