Ideal Commercial
Blog What do COP and SCOP mean for commercial heat pumps
12 October 2026

What do COP and SCOP mean for commercial heat pumps?

COP and SCOP are two important measures used to describe the efficiency of a commercial air source heat pump. COP shows how efficiently a heat pump performs at a specific operating point, while SCOP indicates its efficiency over a representative heating season. Understanding both is essential when comparing heat pumps and designing an efficient commercial heating system.

What does COP mean on a heat pump?

COP stands for Coefficient of Performance and is the heat output divided by electrical input. Put simply, it is the ratio of heat produced, relative to each unit of electricity consumed in the heat pump. So, if a heat pump delivers 4kW of heat while consuming 1kW of electricity, it has a COP of 4.

The important point is that COP represents performance under specific operating conditions. Air source heat pump performance changes according to factors including the outside air temperature and the water flow temperature required by the heating system. So, for example, a heat pump with an outdoor temperature of -3°C and a flow temperature of 55 will give a COP of 2.12. If the outdoor temperature rises to 5°C the heat pump will then have a COP of 2.27. Different parts of the UK will have different outdoor design temperatures which must be taken into account; for example, Edinburgh is -3.4°C and Southampton is -1.8°C.

This means that when comparing COP figures, you need to make sure you are comparing like with like. A COP quoted at an air temperature of 7°C and water flow temperature of 35°C, for example, cannot be directly compared with a figure measured at different temperatures, as you can clearly see from the above example.

null

What does SCOP mean?

SCOP stands for Seasonal Coefficient of Performance and is the seasonal heat output divided by electrical input. 

Rather than looking at one operating point, SCOP takes account of heat pump performance across a representative heating season. It therefore provides a broader indication of how efficiently a heat pump is expected to operate as outdoor temperatures and heating demands change.

Like COP, a higher SCOP indicates greater efficiency: more heat is being produced for each unit of electrical energy consumed.

null

What is the difference between COP and SCOP?

The easiest way to think about the difference is:

COP is a snapshot; SCOP is the bigger picture.

COP is particularly useful for understanding how a commercial heat pump performs under defined conditions and for comparing performance at different air and water temperatures. SCOP provides a seasonal efficiency figure, making it useful when considering overall heat pump performance.

Neither figure should be viewed in isolation, however. Actual system efficiency will also be influenced by factors such as heat loss, system design, flow temperatures, controls, a well serviced air source heat pump and system, emitters and how the building is used.

Why do COP and SCOP matter when choosing a commercial heat pump?

They can help specifiers and installers understand and compare heat pump performance, but selecting the right commercial heat pump involves much more than choosing the highest number on a datasheet. Correct heat pump sizing and system design are essential to achieving efficient performance in practice.

For information – including SCOP and COP measurements - on our ECOMOD range, click here.

Join our mailing list

Stay up to date with the latest news, products and updates from Ideal Commercial. Simply complete your details below to subscribe.

Fields marked with an asterisk * are required
Enquire about our training courses

Complete your details below and we'll be in touch about our commercial heating training courses.

Your details