• Evomax2 Preview Square

    Evomax 2

    This is a comprehensive one-day course designed for commercial service engineers.

    FREE 1 Day Course

    Enquire

    Read more

    The course uses a simple step-by-step approach with hands on to ensure all aspects of installing, servicing, and fault finding can be dealt with quickly and efficiently. If you are an installer/service engineer you must be Gas Safe Registered.

    The course involves discussion with tutors and demonstrations with practical advice. Lunch and refreshments are provided and a certificate is awarded upon completion.

    Training Locations

    Course Content

    • Installation and set up
    • Servicing and fault-finding
    • PCB and control logic is explained
    • Flue flexibility
    • Option kits
  • Cpd Blue Website

    An Introduction to Plant Room Surveys

    A CIBSE accredited CPD seminar covering the stages of plant room surveying.

    FREE 1 Hour CPD Seminar

    Enquire

    Read more

    This CIBSE accredited CPD gives an introduction to the various stages involved in surveying a plant room with particular focus on surveys for retrofit boiler installations. This includes access, risk assessments, pre-survey checks and finally brief information on the best practice of commissioning.

    This seminar is designed for Mechanical & Electrical Engineers, Building Services Engineers, Building Contractors and Consultants.

    Training Locations

    Course Content

    • How to assess the plant room and the requirements for the replacement heat source
    • How to identify the potential risks associated with heating system replacement
    • The importance of pre-survey checks
    • Understanding best practice commissioning
  • Cpd Blue Website

    A Review of Commercial Boiler Heat Exchanger Materials

    A CIBSE accredited CPD seminar covering different commercial boiler heat exchanger materials.

    FREE 1 Hour CPD Seminar

    Enquire

    Read more

    This CIBSE accredited CPD looks at the history of boiler heat exchanger materials, why choosing the correct heat exchanger material is important, the performance and characteristics of Aluminium and Stainless Steel heat exchangers and the importance of water treatment, system protection and proper commissioning.

    Designed for Mechanical & Electrical Engineers, Building Services Engineers, Building Contractors and Consultants.

    Training Locations

    Course Content

    • Brief history of heat exchanger materials and the transition from traditional Cast Iron to modern materials
    • Why the correct heat exchanger choice is important
    • Aluminium heat exchanger performance and characteristics
    • Stainless Steel heat exchanger performance and characteristics
    • The importance of water treatment, system protection and proper commissioning
  • Imax Xtra2 Front Preview

    Imax Xtra 2

    Get to know more about Imax Xtra 2.

    FREE 1 Day Course

    Enquire

    Read more

    The course uses a simple step-by-step approach with hands on training to ensure all aspects of installing, servicing, and fault finding can be dealt with quickly and efficiently. If you are an installer/service engineer you must be Gas Safe Registered to attend a course.

    The course involves discussion with tutors, demonstrations with practical advice. Lunch and refreshments are provided and a certificate is awarded upon completion.

    Training Locations

    Course Content

    • Installation & set up
    • Servicing and fault-finding
    • PCB logic is explained
    • Option kits
  • Imax Xtra El Preview

    Imax Xtra EL

    Learn more about Imax Xtra EL. Please note, this course is available on request only.

    FREE 1 Day Course

    Enquire

    Read more

    The course uses a simple step-by-step approach with hands on training to ensure all aspects of installing, servicing, and fault finding can be dealt with quickly and efficiently. If you are an installer/service engineer you must be Gas Safe Registered to attend a course.

    The course involves discussion with tutors, demonstrations with practical advice. Lunch and refreshments are provided and a certificate is awarded upon completion.

    Course Content

    • Installation & set up
    • Servicing and fault-finding
    • PCB logic is explained
    • Option kits
  • Evomod Preview

    Evomod

    Discover Evomod.

    FREE 1 Day Course

    Enquire

    Read more

    The course uses a simple step-by-step approach with hands on training to ensure all aspects of installing, servicing, and fault finding can be dealt with quickly and efficiently. If you are an installer/service engineer you must be Gas Safe Registered to attend a course.

    The course involves discussion with tutors, demonstrations with practical advice. Lunch and refreshments are provided and a certificate is awarded upon completion.

    Training Locations

    Course Content

    • Installation & set up
    • Servicing and fault-finding
    • PCB logic is explained
    • Option kits

Our training centres

Our state-of the-art Training Centres of Excellence offer a range of comprehensive courses, which can be customised for individual installation and servicing companies.

  • Bridgehead, Hull

    Our new flagship training centre is based at Bridgehead in Hull at the head of the historic Humber bridge. Ideal Heating, Training Centre of Excellence, Meadow Rd Hull, Hessle, HU13 0DG.

    View details
  • Leeds

    The Leeds training centre is handily located just off the M62 at Ideal Heating, Training Centre of Excellence, 2 Sterling Court, Tingley, WF3 1EL.

    View details